Welcome to the official website of Jinan Hydeb Thermal Engineering Co., Ltd.

Jinan Hydeb Thermal Tech Co., Ltd.

Tel:0086(0)531 8896 9230      Fax:0086 (0)531 8896 1739      
Mobile:0086 18660151258       E-mail:info@hydeb.com

Website:① http://www.hydeb.comhttp://www.jnhaide.com         

Office Address:Haixinchuangzhigu 1-1208, Gaoxin District of Ji’nan City, Shandong, China,  250101

Factory Address: No. 38, Dadujiacun Industrial Park, Yaoqiang Street Office, High-tech Zone, Jinan City, Shandong, China

|
Products Detail

Aluminum melting and holding crucible furnace

Product Description

 
 

 

 

 

 

 

 

 

 

 

Aluminum melting and holding crucible furnace

 

Usage
• Mainly used for heat preservation of molten aluminum alloys, suitable for pre-aluminum casting degassing and slag removal, alloy preparation, structure homogenization and temperature regulation.
• Energy sources include electricity and gas.

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

 

Equipment Features
• Higher-quality molten aluminum can be obtained. Molten aluminum temperature accuracy, composition uniformity and lower gas content can be guaranteed.
• Flexible production organization. The crucible can be replaced at any time for production of different types of alloys, without contaminating the molten aluminum.
• Low burning loss of aluminum. The aluminum in the crucible is heated with heat conduction of the crucible, without local high temperature, reducing oxidizing loss and high-temperature volatilization, lowering the burning loss of aluminum to a level below 1.2%.
• The furnace floor is molded by monolithic casting with a casting material. Moreover, at the bottom of the furnace body is a leakage outlet, through which the molten aluminum can outflow once the crucible is broken, reducing the risk of damage to the furnace body.
• The temperature of the furnace chamber and molten aluminum is controlled by series circuit, ensuring sufficient heating efficiency and preventing overheating of the furnace chamber.
• The molten aluminum thermocouple protect tube is made from silicon nitride, which is highly heat-conducting, resistant to corrosion by the molten aluminum, resistant to thermal and cold shocks and highly strong. The tube can be directly immersed in the molten aluminum to measure its temperature. It has a service life of more than 2 years.
• Multiple safety protection modes are adopted, such as molten aluminum over-temperature alarm, furnace chamber over-temperature alarm and crucible leakage alarm.

 

Electric heating aluminum melting and holding crucible furnace
• The electric heating element has a service life of more than one year.
• The heat holding layer is made of Nano-insulation slabs, with little heat stored in the furnace body.
• Melting rate in a cold furnace: ≤4.5h
• Melting rate in a heated furnace: ≤3h

 

Gas fired aluminum melting and holding crucible furnace

• Heating energy sources: natural gas, liquefied petroleum gas (LPG).
• An imported famous-brand automatic burner or gas burner is adopted, ensuring high combustion performance, low noise and zero-discharge of fume, meeting the environmental protection requirements.
• After combustion, the hot furnace gas is blown back to the upper mouth of the crucible through the flue or replaced with warm-up combustion-supporting air through the flue to improve the heating efficiency and reduce fuel consumption.
• Multiple safety protection modes are adopted, such as gas under-pressure, oxidant gas under-pressure and flame failure alarm.
• Melting rate in a cold furnace: ≤3.5h
• Melting rate in a heated furnace: ≤2h

 

 

Stationary aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Stationary aluminum melting and holding crucible furnace

Stationary aluminum melting and holding crucible furnace

 

 

Hydraulic tilting aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Electric heating hydraulic tilting aluminum
melting and holding crucible furnace

Gas fired hydraulic tilting aluminum
melting and holding crucible furnace

Gas fired hydraulic tilting aluminum melting
and holding crucible furnace

 

 

Forklift transfer melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Forklift transfer melting and holding crucible furnace

Forklift transfer melting and holding crucible furnace

 

 

Suspended aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Electric heating suspended aluminum melting
and holding crucible furnace

Electric heating suspended aluminum
melting and holding crucible furnace

Gas fired suspended aluminum melting and
holding crucible furnace

 

 

Mobile cart alternate operation holding crucible furnace

Stationary alternate operation holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Mobile cart alternate operation holding crucible furnace

Stationary alternate operation holding crucible furnace

 

 

Rotary plate alternate operation holding crucible furnace
 

Mobile melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

 

 

Low pressure casting holding crucible Furnace

 

Usage:

• Used for heat preservation of molten aluminum during low pressure casting aluminum casting (metal mold, sand mold).

 

Aluminum melting and holding crucible furnace

Technical Parameters
• Holding furnace capacity: 200-3500 Kg (AL)
• Maximum allowable pressure: 0.30MPa
• Rated furnace chamber temperature: 950℃
• Furnace surface temperature rise: ≤45℃

 

 

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Low pressure casting holding crucible furnace

Low pressure casting holding crucible furnace
 

Low pressure casting holding crucible furnace

 

 

Counter pressure casting holding crucible furnace

 

Usage:

• Used for heat preservation of molten aluminum during counter pressure aluminum casting.

 

Technical Parameters
• Holding furnace capacity: 200-3500 Kg (AL)
• Maximum allowable pressure: 0.60MPa
• Rated furnace chamber temperature: 950℃
• Furnace body temperature rise: ≤45℃

 

Aluminum melting and holding crucible furnace

Aluminum melting and holding crucible furnace

Melting and holding crucible furnace for counter pressure casting
 

Melting and holding crucible furnace for
counter pressure casting

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article